Porcelain tile Pietra di Vals Grey TH2.0, 20 mm outdoor paver, 60x60–60x120 cm, for outdoor use

Compelling and captivating presence

Short description

Pietra di Vals Grey TH2.0 is a 20 mm outdoor paver porcelain tile with a rectified matt finish, suited to terraces, walkways, courtyards and pool surrounds. Available in 4 formats, from 60x60 to 80x80 cm.

Full description

Pietra di Vals Grey TH2.0 reproduces natural stone in porcelain stoneware, with the texture and tonal variation of the original material. It is built for outdoor use, where the surface is permanently exposed to the weather.

The material is porcelain tile, 20 mm thick.

The 20 mm thickness allows dry installation on adjustable pedestals, on gravel or directly on grass, without a screed. The surface resists frost and does not fade in sunlight, unlike porous natural materials.

Key benefits

• Porcelain stoneware with a 20 mm outdoor paver, resistant to wear and stains
• 20 mm thick, for outdoor installation without a screed
• Frost, thaw and UV resistant
• Can be laid on pedestals, gravel or grass
• Suitable for terraces, walkways and pool surrounds
• Rectified edges, for minimal joints and precise alignment
• 4 formats in the same range, combinable in one project
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain tile
• Collection: Pietra di Vals
• Colour: Grey
• Look: 20 mm outdoor paver
• Material: porcelain tile
• Finish: rectified matt
• Available sizes:
  • 60x60 cm
  • 60x90 cm
  • 60x120 cm
  • 80x80 cm
• Thickness: 20 mm
• Use: outdoor and indoor
• Recommended for: terraces, walkways, courtyards, pool surrounds and outdoor paving
• Sold by: m²
• Weight: approx. 44.5 kg/m²
• Delivery: made to order, subject to supplier stock

Recommendation

For pedestal installation, check that the substrate is level and that water can drain away. For adhesive installation outdoors, use a C2 class adhesive. Being a rectified product, it allows 2 mm joints; the joint should still not be omitted entirely. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.