Pietra del Salento Luce trims and mosaics for porcelain tile

Short description

Trims and mosaics from the same range, for finishing steps, skirtings and decorative areas. Sold by the piece and installed alongside the tiles from the collection.

Full description

Pietra del Salento Luce — trims reproduces natural stone in porcelain stoneware, with the texture and tonal variation of the original material. It suits residential projects as much as commercial or hospitality spaces.

The material is porcelain stoneware. Shade variation is V4 — high variation, every tile is different, and the R9 slip rating makes it suitable for dry areas.

Medium formats adapt easily to rooms with irregular geometry and leave less waste when cut.

Key benefits

• Porcelain stoneware with a stone look, resistant to wear and stains
• Trims in the same colour range as the tiles
• Sold by the piece, to match the quantity in your project
• Non-porous surface, easy to clean and hygienic
• Anti-slip version available for wet areas
• 3 formats in the same range, combinable in one project
• Shade variation V4 — high variation, every tile is different
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain trims and mosaics
• Collection: Pietra del Salento
• Colour: Luce
• Look: stone look
• Material: porcelain stoneware
• Finish: anti-slip, natural, natural matt
• Available sizes:
  • BATTISCOPA 7,5x60 cm
  • ELEMENTO “L” MONOLITICO 10x40x3,5 cm
  • MOSAICO SPACCATELLA 30x30 cm
• Shade variation: V4 — high variation, every tile is different
• Slip resistance: R9 — dry areas
• Use: indoor, floor and wall
• Recommended for: living rooms, bedrooms, hallways, kitchens, bathrooms and commercial spaces
• Sold by: piece
• Delivery: made to order, subject to supplier stock

Recommendation

Lay on a stable, properly prepared substrate, using an adhesive suited to the format. For large formats, use a highly deformable adhesive and the double-buttering technique. This product has high shade variation: mix tiles from several boxes during installation for an even distribution of tones. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.