Porcelain tile Parker Grey, concrete look, 30x60–60x120 cm, for indoor use

Short description

Parker Grey is a concrete look porcelain tile with an anti-slip finish, suited to living rooms, hallways, kitchens and bathrooms. Available in 5 formats, from 30x60 to 120x120 cm.

Full description

Parker Grey reproduces concrete in porcelain stoneware, with the texture and tonal variation of the original material. It suits residential projects as much as commercial or hospitality spaces.

The material is full-body coloured porcelain stoneware, 9 mm thick. Shade variation is V2 — slight variation from tile to tile, and the R10 slip rating makes it suitable for occasionally wet areas.

Large formats, up to 60x120 cm, reduce the number of joints and produce an almost continuous surface. The rectified finish allows 2 mm joints.

Key benefits

• Porcelain stoneware with a concrete look, resistant to wear and stains
• Non-porous surface, easy to clean and hygienic
• R10 slip rating, suitable for bathrooms and kitchens
• Large formats, fewer joints, continuous look
• Rectified edges, for minimal joints and precise alignment
• Anti-slip version available for wet areas
• 5 formats in the same range, combinable in one project
• Shade variation V2 — slight variation from tile to tile
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain tile
• Collection: Parker
• Colour: Grey
• Look: concrete look
• Material: full-body coloured porcelain stoneware
• Finish: anti-slip, rectified matt
• Available sizes:
  • 30x60 cm
  • 60x60 cm
  • 60x120 cm
  • 80x80 cm
  • 120x120 cm
• Thickness: 9 mm
• Shade variation: V2 — slight variation from tile to tile
• Slip resistance: R10 — occasionally wet areas
• Use: indoor, floor and wall
• Recommended for: living rooms, bedrooms, hallways, kitchens, bathrooms and commercial spaces
• Sold by: m²
• Weight: approx. 19.3–20.0 kg/m², depending on thickness
• Delivery: made to order, subject to supplier stock

Recommendation

Lay on a stable, properly prepared substrate, using an adhesive suited to the format. For large formats, use a highly deformable adhesive and the double-buttering technique. Being a rectified product, it allows 2 mm joints; the joint should still not be omitted entirely. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.