Porcelain tile Padouk Beige, wood look, 60x60–20x160 cm, for indoor use

Short description

Padouk Beige is a wood look porcelain tile with an anti-slip finish, suited to living rooms, bedrooms and hallways. Available in 6 formats, from 20x120 to 60x120 cm.

Full description

Padouk Beige reproduces natural timber in porcelain stoneware, with the texture and tonal variation of the original material. It suits residential projects as much as commercial or hospitality spaces.

The material is full-body coloured porcelain stoneware, 9 mm and 20 mm thick. Shade variation is V2 — slight variation from tile to tile, and the R9 slip rating makes it suitable for dry areas.

Large formats, up to 20x160 cm, reduce the number of joints and produce an almost continuous surface. The rectified finish allows 2 mm joints.

Key benefits

• Porcelain stoneware with a wood look, resistant to wear and stains
• Non-porous surface, easy to clean and hygienic
• Large formats, fewer joints, continuous look
• Rectified edges, for minimal joints and precise alignment
• Anti-slip version available for wet areas
• 6 formats in the same range, combinable in one project
• Shade variation V2 — slight variation from tile to tile
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain tile
• Collection: Padouk
• Colour: Beige
• Look: wood look
• Material: full-body coloured porcelain stoneware
• Finish: anti-slip, rectified matt
• Available sizes:
  • 20x120 cm
  • 20x160 cm
  • 30x120 cm
  • 30x160 cm
  • 60x60 cm
  • 60x120 cm
• Thickness: 9 mm, 20 mm
• Shade variation: V2 — slight variation from tile to tile
• Slip resistance: R9 — dry areas
• Use: indoor, floor and wall
• Recommended for: living rooms, bedrooms, hallways, kitchens, bathrooms and commercial spaces
• Sold by: m²
• Weight: approx. 18.9–45.1 kg/m², depending on thickness
• Delivery: made to order, subject to supplier stock

Recommendation

Lay on a stable, properly prepared substrate, using an adhesive suited to the format. For large formats, use a highly deformable adhesive and the double-buttering technique. Being a rectified product, it allows 2 mm joints; the joint should still not be omitted entirely. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.