Porcelain tile Marquiña Black, marble look, 7,5x7,5–120x280 cm, for indoor use

Short description

Marquiña Black is a marble look porcelain tile with a high gloss lappato finish, suited to living rooms, bedrooms and hallways. Available in 7 formats, from 7,5x7,5 to 120x280 cm.

Full description

Marquiña Black reproduces classic marble in porcelain stoneware, with the texture and tonal variation of the original material. It suits residential projects as much as commercial or hospitality spaces.

The material is porcelain stoneware, 6 mm and 9 mm thick. Shade variation is V2 — slight variation from tile to tile, and the R9 slip rating makes it suitable for dry areas.

Large formats, up to 120x280 cm, reduce the number of joints and produce an almost continuous surface. The rectified finish allows 2 mm joints.

Key benefits

• Porcelain stoneware with a marble look, resistant to wear and stains
• Non-porous surface, easy to clean and hygienic
• Large formats, fewer joints, continuous look
• Rectified edges, for minimal joints and precise alignment
• 7 formats in the same range, combinable in one project
• Shade variation V2 — slight variation from tile to tile
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain tile
• Collection: Marquiña
• Colour: Black
• Look: marble look
• Material: porcelain stoneware
• Finish: high gloss lappato, rectified matt
• Available sizes:
  • 7,5x7,5 cm
  • 7,5x30 cm
  • 30x30 cm
  • 60x60 cm
  • 60x120 cm
  • 120x120 cm
  • 120x280 cm
• Thickness: 6 mm, 9 mm
• Shade variation: V2 — slight variation from tile to tile
• Slip resistance: R9 — dry areas
• Use: indoor, floor and wall
• Recommended for: living rooms, bedrooms, hallways, kitchens, bathrooms and commercial spaces
• Sold by: m²
• Weight: approx. 14.4–19.9 kg/m², depending on thickness
• Delivery: made to order, subject to supplier stock

Recommendation

Lay on a stable, properly prepared substrate, using an adhesive suited to the format. For large formats, use a highly deformable adhesive and the double-buttering technique. Being a rectified product, it allows 2 mm joints; the joint should still not be omitted entirely. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.