Porcelain tile Loft Grey TH2.0, 20 mm outdoor paver, 60x60–60x120 cm, for outdoor use

Urban vocation

Short description

Loft Grey TH2.0 is a 20 mm outdoor paver porcelain tile with a rectified matt finish, suited to terraces, walkways, courtyards and pool surrounds. Available in 3 formats, from 60x60 to 80x80 cm.

Full description

Loft Grey TH2.0 reproduces natural stone in porcelain stoneware, with the texture and tonal variation of the original material. It is built for outdoor use, where the surface is permanently exposed to the weather.

The material is full-body coloured porcelain stoneware, 20 mm thick. Shade variation is V2 — slight variation from tile to tile, and the R9 slip rating makes it suitable for dry areas.

The 20 mm thickness allows dry installation on adjustable pedestals, on gravel or directly on grass, without a screed. The surface resists frost and does not fade in sunlight, unlike porous natural materials.

Key benefits

• Porcelain stoneware with a 20 mm outdoor paver, resistant to wear and stains
• 20 mm thick, for outdoor installation without a screed
• Frost, thaw and UV resistant
• Can be laid on pedestals, gravel or grass
• Suitable for terraces, walkways and pool surrounds
• Rectified edges, for minimal joints and precise alignment
• 3 formats in the same range, combinable in one project
• Shade variation V2 — slight variation from tile to tile
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain tile
• Collection: Loft
• Colour: Grey
• Look: 20 mm outdoor paver
• Material: full-body coloured porcelain stoneware
• Finish: rectified matt
• Available sizes:
  • 60x60 cm
  • 60x120 cm
  • 80x80 cm
• Thickness: 20 mm
• Shade variation: V2 — slight variation from tile to tile
• Slip resistance: R9 — dry areas
• Use: outdoor and indoor
• Recommended for: terraces, walkways, courtyards, pool surrounds and outdoor paving
• Sold by: m²
• Weight: approx. 44.5 kg/m²
• Delivery: made to order, subject to supplier stock

Recommendation

For pedestal installation, check that the substrate is level and that water can drain away. For adhesive installation outdoors, use a C2 class adhesive. Being a rectified product, it allows 2 mm joints; the joint should still not be omitted entirely. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.