Concrete Road Kerb 50x15/12x25 cm - Leier

Short description

Tapered road kerb, 15 cm at the base and 12 cm at the top, 25 cm high. For streets, car parks and vehicle access.

Full description

The tapered profile resists lateral thrust from traffic. Set on a concrete foundation with a rear haunch.

Produced by Leier from vibro-pressed concrete, the same material and the same colour range as the Leier paving, so kerb and paving can be matched in one project.

Key benefits

• Vibro-pressed concrete for roads and vehicle traffic
• Tapered profile resists lateral thrust from wheels
• Frost and de-icing salt resistant, tested to EN 1340
• Set on a concrete foundation with a rear haunch
• Defines the carriageway edge and protects the pavement structure
• Compatible with the full Leier kerb and paving range

Technical specifications

• Product type: precast concrete kerb
• Brand: Leier
• Model: EBB 50x15/12x25
• Material: vibro-pressed concrete
• Dimensions: 500 × 150/120 × 250 mm
• Pieces per linear metre: 2
• Pallet quantity: 42 pieces/pallet
• Pallets per truck: 14
• Colours: Grey
• Use: outdoor, ground level
• Sold by: piece
• Delivery: made to order, subject to supplier stock

Recommendation

Kerbs are laid on a concrete foundation of at least C16/20, with a rear haunch on the outer face. Leave a 3–5 mm joint between pieces and fill it with mortar. Set the kerb line and level before laying the paving, so the paved surface can be closed against a fixed edge. Order about 5% over the measured length, for cuts at corners and for spares.