Concrete Kerb 100x8x20 cm - Leier

Short description

One metre long concrete kerb, 8 cm wide. A single piece per linear metre means half the joints and faster laying.

Full description

Suited to long straight runs along driveways and paths, where the reduced number of joints gives a cleaner line.

Produced by Leier from vibro-pressed concrete, the same material and the same colour range as the Leier paving, so kerb and paving can be matched in one project.

Key benefits

• Vibro-pressed concrete, frost and de-icing salt resistant
• Keeps paving, gravel and lawn cleanly separated
• Holds the bedding layer in place, so the paved edge does not spread
• Laid on a concrete foundation with a rear haunch
• Colour runs through the body, so chips stay discreet
• One metre length, fewer joints on straight runs

Technical specifications

• Product type: precast concrete kerb
• Brand: Leier
• Model: EBB 100x8x20
• Material: vibro-pressed concrete
• Dimensions: 1000 × 80 × 200 mm
• Pieces per linear metre: 1
• Colours: Grey
• Use: outdoor, ground level
• Sold by: piece
• Delivery: made to order, subject to supplier stock

Recommendation

Kerbs are laid on a concrete foundation of at least C16/20, with a rear haunch on the outer face. Leave a 3–5 mm joint between pieces and fill it with mortar. Set the kerb line and level before laying the paving, so the paved surface can be closed against a fixed edge. Order about 5% over the measured length, for cuts at corners and for spares.