Porcelain tile Ceppo di Grè White TH2.0, 20 mm outdoor paver, 60x60–60x120 cm, for outdoor use

Italian essential

Short description

Ceppo di Grè White TH2.0 is a 20 mm outdoor paver porcelain tile with a rectified matt finish, suited to terraces, walkways, courtyards and pool surrounds. Available in 4 formats, from 60x60 to 120x120 cm.

Full description

Ceppo di Grè White TH2.0 reproduces natural stone in porcelain stoneware, with the texture and tonal variation of the original material. It is built for outdoor use, where the surface is permanently exposed to the weather.

The material is full-body coloured porcelain stoneware, 20 mm thick. Shade variation is V3 — moderate variation, natural character, and the R10 slip rating makes it suitable for occasionally wet areas.

The 20 mm thickness allows dry installation on adjustable pedestals, on gravel or directly on grass, without a screed. The surface resists frost and does not fade in sunlight, unlike porous natural materials.

Key benefits

• Porcelain stoneware with a 20 mm outdoor paver, resistant to wear and stains
• 20 mm thick, for outdoor installation without a screed
• Frost, thaw and UV resistant
• Can be laid on pedestals, gravel or grass
• Suitable for terraces, walkways and pool surrounds
• Rectified edges, for minimal joints and precise alignment
• 4 formats in the same range, combinable in one project
• Shade variation V3 — moderate variation, natural character
• No sealing treatment required after installation

Technical specifications

• Product type: porcelain tile
• Collection: Ceppo di Grè
• Colour: White
• Look: 20 mm outdoor paver
• Material: full-body coloured porcelain stoneware
• Finish: rectified matt
• Available sizes:
  • 60x60 cm
  • 60x120 cm
  • 80x80 cm
  • 120x120 cm
• Thickness: 20 mm
• Shade variation: V3 — moderate variation, natural character
• Slip resistance: R10 — occasionally wet areas
• Use: outdoor and indoor
• Recommended for: terraces, walkways, courtyards, pool surrounds and outdoor paving
• Sold by: m²
• Weight: approx. 44.5–45.8 kg/m², depending on thickness
• Delivery: made to order, subject to supplier stock

Recommendation

For pedestal installation, check that the substrate is level and that water can drain away. For adhesive installation outdoors, use a C2 class adhesive. Being a rectified product, it allows 2 mm joints; the joint should still not be omitted entirely. This product has high shade variation: mix tiles from several boxes during installation for an even distribution of tones. We recommend ordering 8–10% above the measured area, to cover cutting waste and keep a reserve for repairs.